This
model is designed so that it may be operated manually
or semi-automatically. It is constructed to handle rolls
of plastic material 24"(60cm) wide on a vacuum table
measuring 22"(55cm) wide by 28"(70cm) long.
Loading of plastic film is done manually. The semi-automatic
operation cycle then pre-heats the plastic sheet, draws
the vacuum, cools and lifts the plastic sheet from the
moulds. The completed section is then cut off manually
before repeating the next cycle.
•
Electronic
and Pneumatic Controls
The
machine has a full range of electronic and pneumatic control
for easy and accurate use with a self-contained vacuum
pump. Independment air compressor is required. Heating
of the plastic is accomplished by the specifically designed
heating elements so arranged that heat effect is even
with minimum blemishes formed on the plastic material.
Temperature of the heating elements is not adjustable
but controlled by the heating timer.
•
Highly
Adaptable
Most
of the modern themoplastic films, such as PVC, polyethylene,
polycarbonate, polystyrene and acetate, of 0.2mm to 0.8mm
thickness can be used. This model is adaptable to a wide
range of end products. It is highly dependable and economical
to use, especially ideal for low volume production and
trial forming of sample articles.
•
Single
head model is also available, for more information,
please contact us.
Specifications:
Item\Model
FV-30DA
FV-30SA
Suction Tray Forming Area
550mmx700mm (22"
x 28")
Max. Forming Frame Holder
600mmx750mm (24"
x 30")
Max. Forming Depth
125 mm (5")
Cylinder stroke
150 mm (6")
Thickness of Film
0.2 mm - 1 mm
Dimensions
2188mmx1113mmx1575mm
1550mmx1113mmx1575mm
Heater
8000 Watts
Vaccum Pump Capacity
1 H.P.
Air Compressor Capacity
1 H.P.
Power Supply
3 Phase 220V~440V
Net Weight
520 Kg
280 Kg
Gross Weight
670 Kg
340 Kg
Packing
4.4 cbm
3.4 cbm
The
above specifications are subject to change without prior notice.
